Product Details:
Size | 20X25 |
Material | BENTONITE |
Color | BLACK, BLUE |
Brand | HITECH |
Thickness | 20*25 mm |
Water Absorption | 220% |
CERTIFICATION | BBA APPROVED |
Additional Information:
Product Details:
Size | 150 to 300 mm |
Color | Black, White |
Material | PVC |
Usage/Application | Construction Joints |
Brand | HITECH |
Type | Ribbed, Kicker, Dumbell |
Average Breaking Strength | 13 mpa |
Code | KFW-507 |
Nominal Width | 230 mm |
Thickness | 5 mm |
Recommended Hydrostatic Pressure in Meter of Water | 25 Bar |
Product Details:
Code | RX-101 |
Nominal Width | 20 x 25 |
Material | Bentonite |
Packaging | 30-meter rolls |
Swellable Waterstops is an active sodium bentonite/butyl rubber based water stop designed to stop water infiltration through the cast in place concrete construction joints by expanding upon contact with water to form a positive seal against the concrete. It also fills the cracks and pores on the concrete.
Usage Areas
Used for concrete joints, and intersections of old and new concrete in the construction of pools, foundations, tunnels, manholes, retaining walls, garages, curtain walls, water deposits, water purification facilities and pipe penetrations into above-mentioned constructions.
Advantages
Surface Preparation
The surface must be clean and dry. It must not be applied to wet, frozen, greasy or dusty surfaces, and under wet weather conditions.
Application
Consumption
Depends on length.
Prices are negotiable subject to quantity.
Additional Information:
Product Details:
Material | Bentonite |
Packaging Size | 30-meter rolls |
Code | RX-101 |
Nominal Width | 20 x 25 |
Hydrophilic Water Stops is an active sodium bentonite/butyl rubber based water stop designed to stop water infiltration through the cast in place concrete construction joints by expanding upon contact with water to form a positive seal against the concrete. It also fills the cracks and pores in the concrete.
Usage Areas:
Used for concrete joints, and intersections of old and new concrete in the construction of pools, foundations, tunnels, manholes, retaining walls, garages, curtain walls, water deposits, water purification facilities and pipe penetrations into above-mentioned constructions.
Advantages:
Surface Preparation:
The surface must be clean and dry. It must not be applied to wet, frozen, greasy or dusty surfaces, and under wet weather conditions.
Application:
Consumption:
Depends on length.